ZENISOAPBASE Melt & Pour, Pro-C, Transparent, 1 kg

ZENISOAPBASE Melt & Pour, Pro-C, Transparent, 1 kg

ZENISOAPBASE soap mass is used for the production of soaps and soap bouquets. It has a vegetable base and is free of animal fats and oils - 100% vegan. The resu... read more

In stock
39 piece
Product code:
MH103_1

5,91 € incl. VAT

5,91 € / kg
SKLADOM piece
Best before date: 12/2026
Batch: 20241211

Product description

ZENISOAPBASE soap mass is used for the production of soaps and soap bouquets. It has a vegetable base and is free of animal fats and oils - 100% vegan. The resulting soap has excellent lathering power and, thanks to its high glycerin content, also moisturizes the skin perfectly.

This soap base is ideal for higher watering volumes. It solidifies faster than the base mass. It has a very high transparency which makes it ideal for soaps with watered images.

When colouring the mass with ZENICOLOR dyes, it is better to mix 70% of the transparent mass CLEAR and 30% of the white mass WHITE to avoid excessive dye consumption.

In case you pour the soap in different layers, the individual layers should be sprayed with alcohol to increase adhesion. We recommend the IPA product from our range. The mass is liquid for quite a long time, so it can be worked with even on more complicated projects. There is no loss of volume of the soap castings during prolonged standing (especially important when creating bouquets).

Working with soap mass is not difficult at all. Just cut the required amount of soap mass into smaller parts, this will speed up the melting phase of the mass. Heat the mass slowly in a water bath or in the microwave. Caution, the mass must not boil, so heat it slowly. You can add a few drops of essential or fragrance oil, liquid or powdered colouring and dried herbs to the melted mass to spice it up.

Stir slowly so you don't get unnecessary air bubbles that create holes when it sets. Pour the soap mixture into the prepared mould. Immediately after pouring, we recommend applying a couple of squirts of bubble remover with a spray bottle - this is 99% Isopropanol. The final step is to let it set. After dumping, you can use the soap right away, but we recommend letting the mass sit for about 2 weeks for better properties.

Melting point: 65°C (65°F) do not exceed 75°C (75°F) when heating!

For more information on the quality of the product, please refer to the certificate, which we update every time we make a new batch.

All raw materials supplied are of cosmetic quality, not suitable for internal use. Please use appropriate protective equipment when handling.

Download