Product description

The round metal stand for flat wooden wicks is used to fix the wick in both standing candles and candles in containers.

For better stability, the wick can be glued with a double-sided foam pad or attached with wax.

Thewooden wick bursting consists of one piece of wooden wick and one metal base, which serves to catch, possibly sticking the wick to the bottom of the container.

Type: cracking
Size: .03
Width: 6.4 mm
Height: 7.6 cm

The wooden wicks you will find in our offer are high quality from American brand. They crackle gently during burning or are made in a silent variant. They are fully non-toxic, organic and eco-friendly.

ATTENTION! It is very important for the correct burning of the candle that the wick should be shortened to a length of 0.5-0.6 cm before the first lighting.

The correct wick size is chosen according to the type of wax and the diameter of the candle:

Vegetable waxes with coconut: wick .02 Booster, 0.3 silent/crackle, .01 Tuba
Vegetable waxes blended with soy: wick .03 Booster, .01 spiral
Container diameter and wick width required
5 cm - 6.4 mm wick width
6,3 cm - 9,5 mm wick width
7,6 cm - 12,7 mm wick width
9 cm - wick width 15,9 mm
10 cm - wick width 19,1 mm
11,5 cm - 22,2 mm wick width


100% soy wax: wick .04 Booster
Container diameter and wick width required
5 cm - 6.4 mm wick width
6.3 cm - 9.5 mm wick width
7,6 cm - 12,7 mm wick width
9 cm - wick width 15,9 mm
10 cm - wick width 19,1 mm
11,5 cm - 22,2 mm wick width

Beeswax: wick .03 Booster, .04 Booster, .01 Spiral
Container diameter and wick width required
5 cm - wick width 6,4 mm
6,3 cm - 9,5 mm wick width
7,6 cm - 12,7 mm wick width
9 cm - wick width 15,9 mm
10 cm - wick width 19,1 mm
11,5 cm - 22,2 mm wick width

Paraffin: wick .02 silent/crackle, .01 Tuba
Container diameter and wick width required
5 cm - wick width 6,4 mm
6,3 cm - 9,5 mm wick width
7,6 cm - 12,7 mm wick width
9 cm - wick width 15,9 mm
10 cm - wick width 19,1 mm
11,5 cm - 22,2 mm wick width

TROUBLESHOOTING

Wick burns briefly at the beginning and then goes out
This problem occurs if the initial wick length is incorrect before the candle is first lit. The wick needs to be shortened to approximately 0.5 cm (sometimes less) than recommended and the burn test needs to be carried out again. If the shape of the container does not allow the wick to be shortened, it is recommended to add wax to the candle to the required height. It is necessary to remove the burnt parts from the wick between each burning of the candle.

The wick should crack, but not burst
You have purchased a crackling wick, but it cracks little or not at all during burning. In this case, the dyes or fragrances used may be to blame. Try making a candle from pure wax and test the cracking again.